Software Canon EOS 850D T8i Professional

Details

Canon EOS 850D  T8i   Kiss X10 Software supports Windows 7, 8, 10 and 11 ..  Emulations are not supported.

• Want a look before you purchase - check out the slideshow at the bottom of this page. 
• You can also download ‘FREE Demo Software or contact us at cc5@earthlink.net.

Professional

Essential Functions

General allows you to:

1. Read the Model and Firmware Version.
2. Read and Change the Serial Number.
3. Read the Shutter Count.
4. Read the Mirror Count.
5. Read the Release Count.
6. Print the CameraFAX - Before and After Service.

• Important: Changing the Serial Number to anything other than a legitimate Canon Serial number can seriously damage the camera.
• Shutter, Mirror and Total Release Count changes are done in the Shutter Calibration Plugin.

Error Codes allows you to:

1. Read the Latest Error and Last 7 Internal Error Codes.
2. Read the Possible Causes, including the Lens and Shot count when the error happened.
3. Read the Date the Error Happened.
4. Clear the Error Codes after Service.

Calibration Data allow you to:

1. Save the Camera Calibration Data from the original Main Board.
2. Load the Camera Calibration Data into a new Main Board.
3. Use salvage Main Boards for a repair.
4. View the transfer process through the status bar at the bottom

User Settings allows you to:

1. Save the User Settings on your PC.
2. Restore the User Settings after making adjustment or changing the Main Board.
3. View the Transfer process through the status bar at the bottom

Professional CameraFAX allows you to:

Give your customer a Detailed Report: 

1. Camera Details
2. Condition and Wear 
3. Logged Errors - Before and After Service
4. Shutter Replacement History - Current and Previous Shutters 
5. Mirror Box Count - Current and Previous Mirror Boxes 
6. Print the Professional CameraFAX - BEFORE AND AFTER SERVICE!

Professional Apps

Shutter Calibration

Shutter Timing 

1. Read and change the Shutter Timing. 

X Contact Timing

1. Read and Change X Contact Timing.

Shutter Count

1. Read and Change the Shutter Count.
2. Read and Change the Release Count.
3. Read and Reset the Shutter Replacement History.

• Understanding Shutter, Mirror Counts and Histories
• Understanding Shutter, Mirror and Total Count

Mirror Count

1. Read and Change the Mirror Count.
2. Read and Reset the Previous Mirror Boxes number.
3. Read the Total Mirror Count

Auto Exposure Calibration

Backup

1. Backup the AE Data separately from your camera data before making adjustments.
2. Restore the AE Data, if necessary, without effecting any other camera adjustments. 

• Understanding Auto Exposure Data Files

Calibration

1. Calibrate the Automatic Exposure System 

• Requires a Light Box!

Sensor Output

1. Read the ‘Live’ output of the AE Cells.
2. Check the Alignment of the AE Unit.
3. Read the Minimum, Maximum and Average light readings.

AE Shift

1. Shift the output of the AE sensors up or down.
2. This feature allow you to deliberately make the camera ‘Under’ or ‘Over’ exposure.  

Main Board Replacement

Backup Calibration

• Backup all camera calibration files in one easy step.  Install the calibration files from the old Main Board into the New Main Board
• Understanding Calibration Data Files
• Replacing the Main Board

Initialize the Main Board

1. Initialize new Main Boards. Reqired for new Main Boards.
2. Initialization should also be done if you are installing a good used Main Board, but have been unable to backup the calibration data from the original Main Board.

Load Calibration

1. Load the saved Calibration Data files into the the new Main Board.

Model and Serial

1. View and change the cameras electronic serial number.  Serial numbers are stored on several boards and all should agree with the serial number on the outside of the camera.
2. View and change the Model Name.  

• Important: Changing the Serial Number to anything other than a legitimate Canon Serial number can seriously damage the camera.