Reviews

Software Canon EOS R6 Professional
Price: $149.00
  • Average Rating 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
(5 out of 5 with 1 vote)
Product Description:

Canon EOS R6 Software supports Windows 7, 8, 10 and 11 ..  Emulations are not supported.

 

Canon R6 Professional

 

Essentail

Plugins

General

Shutter Calibration

Error Codes

Main Board Replacement

Calibration Data

 

User Settings

 

Professional Camera FAX

 

 

 

Essential

General:

  1. Read the Model and Firmware Version.
  2. Read and Change the Serial Number.
  3. Read Shutter Count / Change it in the Shutter Plugin
  4. Read the Release Count / Change it in the Shutter Plugin
  5. CameraFAX - Before and After Service.
  • Important: Changing the Serial Number to anything other than a legitimate Canon Serial number can seriously damage the camera.

 

Error Codes:

  1. Read the Latest and the last 7 Internal Error Codes.
  2. Know the Possible Causes.
  3. Know the Lens installed on the camera when the error happened.
  4. Know the Date the Error happened.
  5. Know the Shutter count when the error happened.
  6. Clear the Error Codes after Service.

 

Calibration Data:

  1. Save the Camera Calibration Data from the Main Board.
  2. Load the Camera Calibration Data into a new Main Board.
  3. Use used but good Main Boards for a repair.
  4. View the transfer process through the status bar at the bottom

 

User Settings:

  1. Save the User Settings file to your PC.
  2. Load / restore the User Setting after service.
  3. View the Transfer process through the status bar at the bottom

 

Plugins

 

Shutter Calibration

 

  1. Test and Adjust the Shutter Timing.
  2. Test and Adjust the X Contact Timing.
  3. Change the Shutter Count after replacing the Shutter.
  4. Read the Shutter Replacement History; replacement date and actuations.
  5. Read and Change the Release Count

 

 

Main Board Replacement

  1. Backup camera Calibration Data.
  2. Initialize New or Used Main Boards.
  3. Load your Calibration Data from you old Main Board into you new Main Board.
  4. Check the model and serial number, change if necessary.
  5. Copy the Sensor Board ID to the new Main Board, if necessary.
 


More Detail

Thank you for your work on this SPT software
  • Rating 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
Mike Parsell (CA) - September 22nd 2023
Hi Chuck, we have the R6 software up and running now with no problems. Thank you for your work on this SPT software.

Mike
Kurt's Camera Repair
7403 Princess View Dr.
San Diego CA 92120