Software Canon EOS 100D Professional

Great Canon Service Adjustment Software for the:

Canon EOS 100D 

10% Discount for 2 or more softwares on the same Invoice!

Price: $175.00
Quantity:
Total:  

Details

Canon EOS 100D_Rebel SL1_Kiss 7 Software supports Windows 7, 8, 10 and 11 ..  Emulations are not supported

 

 

Professional Features

This software consists of the Essential Section and Three Plugins

The Essential Section has 6 features

  1. General Information
  2. Error Codes
  3. Camera Data
  4. Digital Data
  5. Professional Camera FAX

There are 3 Advanced Plugins 

  1. Shutter Calibration
  2. Auto Exposure Calibration
  3. Main Board Replacement

 

 

Essential Section

General Information allows you to:

  1. Read the Model and Firmware Version. 
  2. Read and Change the Serial Number, Shutter Count and Mirror Count.
  3. Read the Total Count.  * Total Count can be changed using the Shutter Calibration Plugin.
  4. Produce the Professional Camera FAX - Before and After Service.

 

Error Code allows you to:

  1. Read the LAST 7 Internal Error Codes.
  2. See the Possible Causes which includes the Lens, and Shot count when the error occurred.
  3. Clear the Error Codes after service.

 

Camera and Digital Data allows you to:

  1. Save the Camera and Digital Data from the original Main PCB.
  2. Load Camera and Digital data into a new Main PCB.
  3. Use salvage Main PCBs for the repair.

 

Professional Camera FAX allows you to:

Give your customer a Detailed Report: 

  • Shot Count Record 
  • Error Record - Before and After Service
  • Shutter Replacement History 
  • Mirror Box Replacement History 
  • AE Unit Temperature
  • Produce the Professional Camera FAX - BEFORE AND AFTER SERVICE!

 

Advanced Plugins

Shutter Calibration

 

Shot Count allows you to:

  1. Read and Change the Shutter Count
  2. Read and Reset the Shutter Replacement History.
  3. Read and Change the Total Count.  

 

Mirror Count allows you to:

  1. Read and Change the Mirror Count
  2. Read and Reset the Mirror Replacement History 

 

Auto Exposure Calibration

Backup allows you to:

 

AE Temperature allows you to:

  1. Read the temperatures of the AE Unit quickly.
  2. Temperature should be a standard part of your diagnostic checks.  Especially, in cases of Over Heating or for calibration problems that are abnormal or Intermittent.

 

Calibration allows you to:

  • Adjust the AE light meter system.  Note:  You need a Light box for this function.  

 

Sensor Output allows you to:

  1. Read the ‘Live’ output of the AE cells.  Note:  You need a Light box for this function.
  2. Check the alignment of the AE Unit.
  3. Read the Minimum / Maximum and Average light readings at a glance.

 

AE Shift allows you to:

  1. Shift the output of the AE sensors up or down.  Note:  You need a Light box for this function.
  2. You can deliberately make the camera ‘Under’ or ‘Over’ expose.  This can be a customer preference, it can be needed by a change in focusing screen, or there may be other reasons.

 

Main Board Replacement

Backup Calibration allows you to:

 

Initialize Board allows you to:

  1. Initialization is required when a new Main Board is installed.
  2. After installing a new Main Board the Firmware must be re-installed before Initialization!
  3. Initialize the new Main Board.  The process is automatic and the screens will walk you through the process.  During Initialization, the generic calibration files in the new main Board are deleted and data files from other boards in the camera are loaded into the new board. 

 

Load Calibration allows you to:

  1. Load the Calibration data into the new Main Board.  The screens will walk you though the process.
  2. Important:  Make sure the battery is fully changed.  Loosing power or interrupting the Upload process in any way may damage your new Main Board.

 

Model and Serial allows you to:

  1. View and change the cameras electronic serial numbers.  They are stored on several boards, all should agree with the serial number plate on the outside of the camera.  
  2. View and change the Model Name.  This camera is sold under different names, you may need to correct the Model Name after you replace the Main Board.

 

Great Help Files

Can’t remember everything, don’t worry.  Each page is linked to its section of the Help Files .. no hunting! 

 

Software Replacement / Error Codes / Updates!

If you loose your Software Zip package .. we’ll replace it free … no Problem.  We evolve Error Code section, your software will let you know that an update is available.  When we make a software update, minor or major, the update is FREE!

 

Lots of horsepower under the hood with a common sense interface

Discounts

Software 10% Off Sale

10% discount for orders of 2 or more Softwares on the same invoice!
 
10% Discount for orders of 2 or more $157.50 / ea You Save: $17.50 (10%)!
Qualifications for this discount:
The order in your cart must have 2 or more products from the following categories: Canon Adjustment Software

Reviews

Your opinion is important to us...tell us what you think!

Review This Product