Reviews

Canon Adjustment Software EOS R_RA_Professional
Price: $149.00
  • Average Rating 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
(5 out of 5 with 3 votes)
Product Description:
  • Canon Adjustment Software for EOS RP requires Windows 7, 8, 10, or 11.  Emulations are not supported.
  • Experience user-friendly 'Help'! Every section is linked to the feature you are currently using.
  • Discover detailed information by checking out the Slide Show located at the bottom of this page.
  • 1st time buyer?  Experience our ‘FREE Demo Software to explore the product before making a purchase.

 

Canon EOS R and RA Professional

Essentail and Two Plugins

 

Essential: Plugins:
General Shutter Calibration
Error Codes Main Board Replacement
User Settings  
Professional CameraFAX  
   

 

 

 

 

Essential

General:

  • Read the camera’s Model, Firmware version, Shutter and Release Counts.
    • Changes to the Shutter, Mirror, and Total Release Counts are done exclusively through the Shutter Calibration Plugin.
  • Read and Change the Serial Number.

Important:  Altering the Serial Number to anything other than an authentic Canon Serial Number can result in severe damage to the camera. 

 

Error Codes:

  • Retrieve the last 8 internal Error Codes along with their possible causes.
  • Identify the Date, Shutter Count, and Lens that were in use on the camera when the errors occurred.
  • Clear the Error Codes following your service.

 

Calibration Data:

  • You can use Professional to transfer the Calibration Data from your old Main Board to a RELIABLE USED Main Board.

 

  • You MUST use the Main Board Replacement Plugin to transfer the Calibration Data from your old Main Board to a NEW Main Board.

 

User Settings:

  • Download the user's camera settings to your PC and use them to restore those settings after adjustments or major repair like a Main Board replacement.

 

Professional CameraFAX:

  • CameraFAX provides your customers with a comprehensive pre- and post-repair service report, offering indisputable proof of the service performed.

 

  • CameraFAX uses the data uploaded from your camera, organized by Essential and your Plugins, to generate a comprehensive camera report.

 

  • Customize headers and footers with your contact information.
    • Include business details, logo, and warranty information

 

 

Professional Plugins

 

Shutter Calibration

Shutter Timing:

  • Review and adjust the Shutter Timing settings.
    • When you replace the Shutter, the Shutter Timing must be adjusted at the highest speed.
    • When replacing the Main Board without the original Camera Data.

 

X Contact Timing:

  • Review and adjust X Contact Timing.
    • If you replace the Shutter
    • When replacing the Main Board without the original Camera Data.
    • In cases where customers report vignetting in flash photos.

 

Shutter Count:

  • Review and change the Shutter Count.
    • Reset the Shutter Count to '0' when replacing the Shutter with a New Shutter.
    • If you use a Good Used Shutter; reset the Shutter Count to match the number of activations made by the newly installed used shutter.
    • Reset the shutter count when replacing the Main Board without the original Camera Data.

 

Previous Shutters:

  • Review or modify the Previous Shutter Count.

IMPORTANT:  The Previous Shutter Count is an important measure of the camera's use.  Only adjust Previous Shutter Count when replacing the Main Board without the original Camera Data and make sure that it matches the original count.

 

 

Release Count:

​​

​​Review or modify the Previous Shutter Count.

 

IMPORTANT:  The Total Release Count is an important measure of the camera's use.  Only adjust Total Count when replacing the Main Board without the original Camera Data and make sure that it matches the previous Main Board's count.

 

 

 

Main Board Replacement

Backup Calibration

  • Backup Calibration BEFORE REMOVING THE FAULTY MAIN BOARD.

 

Initialize Board

  • Initialization is REQUIRED when installing a New Board, BUT it is NOT REQUIRED when installing a Good Used Board.

 

Load Calibration

  • Upload the cameras original calibration file from your PC into your New or Used Main Board.

 

Model and Serial Number

  • You have the option to modify the Serial Number, update the Sensor ID, and alter the Model name. However, these adjustments are unnecessary if you've uploaded the camera's original calibration file.
    • The Serial Numbers must match the label on the bottom of the camera.

 

  • The Sensor ID saved on the Main Road should be consistent with the one stored in the Sensor PCB since it represents the sensor's defect map. If you haven't uploaded the original Calibration Data, the IDs won't be in sync. Clicking 'Copy ID of Main Board' will harmonize the IDs. However, in the case of noticeable sensor defects, you'll need to send the camera to Canon for them to load the correct defect map.

 

  • Model names may vary in different geographic locations. You have the option to use the "Change Model Name" to match the model name with your specific location.

 

 

 


More Detail

Great Support
  • Rating 5/5 Stars.
  • 1
  • 2
  • 3
  • 4
  • 5
Richard Broadbent () - March 28th 2022
March 22, 2022

Charles ..... Sorry to say I'm in trouble again. The problem is I attach the camera and "connect" the camera opens the shutter and the LCD shows image although there is no lens but if I change the view the brightness changes. Then the software advises the board requires re initialising It wont allow to change any settings, on the camera (its locked in P with red led on the back glowing away)

Any help would be appreciated ... Richard, Camera Service Centre, Sydney


March 25, 2022

YES YES YES! So far so good the "Update" appears to working. Thanks to Your TEAM and You ..... Richard